BE-AM Built Environment – Additive Manufacturing Symposium 2019

On November 20, 2019 the symposium BE-AM | Built Environment – Additive Manufacturing will take place at the Formnext, Frankfurt. For the fifth time, Prof. Dr.-Ing Ulrich Knaack (Institute of Structural Mechanics and Design, ISMD) and Prof. Dr.-Ing. Oliver Tessmann (Digital Design Unit, DDU) invite experts from practice, research and industry  to explore the current status and future potential of additive manufacturing for construction and architecture.

Digitalisation has significantly changed design and planning in recent years. With 3D printing, this development is now migrating into the realm of construction. Materials such as concrete, clay and steel are used in additive manufacturing processes and 3D printers reach dimensions that suit the needs of construction. At the same time, complex material requirements, compliance with standards and norms and the integration of new processes into established procedures on site represent challenges that still have to be mastered.

 

Speakers:

PROF. THEO SALET |  TU EINDHOVEN

SHAJAY BHOOSHAN BRG | ETH ZÜRICH

ANA ANTON DBT | ETH ZÜRICH

PROF. HARALD KLOFT |  ITE | TU BRAUNSCHWEIG

THOMAS FEHLHABER  |  UNIPOR

GIJS VAN DER VELDEN  |  MX3D

AMAURY THOMAS |  SOLIQUID

PROF. JÖRG LANGE IFSW | TU DARMSTADT

Location:

Formnext, Frankfurt

 

Date:

Wednesday 20. November 2019, 9:00 – 17:00

 

Registration

has not been opened

 

BE_AM_2019_ Poster Kopie

 

 

Contact:

Technische Universität Darmstadt

Fachbereich Architektur

DDU – Digital Design Unit – Digitales Gestalten

El-Lissitzky-Str. 1

64287 Darmstadt

 

be-am@dg.tu-darmstadt.de

fon: +49 6151 16-22483

fax: +49 6151 16-22480

 

      PMP Logo

The event is supported by formnext – International exhibition and conference on the next generation of manufacturing technologies – and the Profile Area “From Material to Product Innovation” PMP of the TU Darmstadt. All lectures will be held in English.

 

 

            DDU-logo_BLACK_RGB        ismd


BE-AM – SYMPOSIUM – 2018

On October 12, 2018 the symposium BE-AM | Built Environment – Additive Manufacturing will take place at the Georg-Christoph-Lichtenberg-Haus in Darmstadt. For the fourth time, Prof. Dr.-Ing Ulrich Knaack (Institute of Structural Mechanics and Design, ISMD) and Prof. Dr.-Ing. Oliver Tessmann (Digital Design Unit, DDU) invite experts from practice, research and industry to the TU Darmstadt to explore the current status and future potential of additive manufacturing for construction and architecture.

Digitalisation has significantly changed design and planning in recent years. With 3D printing, this development is now migrating into the realm of construction. Materials such as concrete, clay and steel are used in additive manufacturing processes and 3D printers reach dimensions that suit the needs of construction. At the same time, complex material requirements, compliance with standards and norms and the integration of new processes into established procedures on site represent challenges that still have to be mastered.

At the BE-AM Symposium 2018, experts present, among other things, the first AM concrete components on site, 3D printed street furniture made of plastic waste and research into digital fabrication and robotics within the architectural practice of a planning office.

 

Speakers:

ALBAN MALLET, XTREEE, Paris

WESSEL VAN BEERENDONK, STUDIO RAP, Rotterdam

FOTEINI SETAKI, THE NEW RAW, Rotterdam

KåRE STOKHOLM POULSGAARD, GXN, Copenhagen

PAULO CRUZ, ADVANCED CERAMICS LAB, Braga

ROBERTO NABONI, UNIVERSITY SOUTHERN DENMARK, Odense

 

Location:

Georg-Christoph-Lichtenberg-Haus

Dieburger Str. 241, 64287 Darmstadt

 

Date:

12. October 2018, 10:00 – 17:00

 

Registration

The symposium registration is closed.

Mitglieder der Architektenkammer Hessen erhalten gegen Teilnahmebescheinigung 6 Fortbildungspunkte für den Besuch des Symposium. Für die Ausstellung der Teilnahmebescheinigung berechnen wir eine Bearbeitungsgebühr von  35€. Wir danken der Architektenkammer Hessen für die freundliche Unterstützung.

Contact:

Technische Universität Darmstadt

Fachbereich Architektur

DDU – Digital Design Unit – Digitales Gestalten

El-Lissitzky-Str. 1

64287 Darmstadt

 

machleid@dg.tu-darmstadt.de

fon: +49 6151 16-22483

fax: +49 6151 16-22480

 

formnext2018_LOGO_Vollversion_D      PMP Logo

The event is supported by formnext – International exhibition and conference on the next generation of manufacturing technologies – and the Profile Area “From Material to Product Innovation” PMP of the TU Darmstadt. All lectures will be held in English.

 

 

            DDU-logo_BLACK_RGB        ismd